Cisco Devnet Sandbox Setup
Max reservation time: 4 hours
Sandbox user reserves the CML Sandbox and receives software VPN access information and credentials via email at the start of the reservation. (For more information, see the next tab called “VPN Access”.) Once connected via software VPN the developer can access the Sandbox’s resources with the details below.
AFTER you’ve established a VPN connection:
Cisco Modeling Labs Server
Address: 10.10.20.161
Username: developer
Password: C1sco12345
HTTPS Port for CML GUI/API: 443
Example Connection: https://10.10.20.161
SSH Port for Console Connections: 22
Simulated Hosts and Network Devices
By default CML nodes will use credentials of cisco cisco
For detailed addressing and credential details for the sample simulation, please see the Network Devices tab
Devbox
SSH Port: 22
RDP Port: 3389
Establishing a VPN connection
download and install Cisco’s AnyConnect VPN Client software
https://developer.cisco.com/site/sandbox/anyconnect/
Install guide
https://devnetsandbox.cisco.com/Docs/VPN_Access/AnyConnect_Installation_Guide.pdf
When your Lab reservation begins, you will receive several emails communicating important information about the status of your Lab.
The first email is sent to you from the Lab provisioning automation engine, and indicates that resources in your Lab are in the process of being provisioned and tested. Your Lab is NOT READY yet, but this email will give an estimate of when your Lab will be available.
The second email will be sent to you when your Lab is fully provisioned, tested and READY for you to connect. In this email you’ll find the information required by AnyConnect to establish a VPN connection to your Lab (Network IP Address, VPN Username, VPN Password).
How to connect to vpn
https://devnetsandbox.cisco.com/Docs/VPN_Access/AnyConnect_Connection_Guide.pdf
Click reserve
You will get an email saying that the setup will last about 10 minutes
Follow email instructions to connect to the vpn
then go to the ip address in the setup guide 10.10.20.161
here is their sample network
Linux install
To get to a switch console:
- select the switch
- select consol
- Enable password is cisco
- Default user is cisco
Credentials for sample lab devices
Component
Type
IP Address
Method
Credentials
internet-host01
Linux
10.10.20.182
SSH
cisco / cisco
internet-rtr01
IOS XE
10.10.20.181
TELNET
cisco / cisco
edge-firewall01
ASA
10.10.20.171
TELNET
cisco / cisco
edge-sw01
IOS
10.10.20.172
TELNET
cisco / cisco
core-rtr01
IOS XR
10.10.20.173
TELNET
cisco / cisco
core-rtr02
IOS XR
10.10.20.174
TELNET
cisco / cisco
dist-rtr01
IOS XE
10.10.20.175
TELNET
cisco / cisco
dist-rtr02
IOS XE
10.10.20.176
TELNET
cisco / cisco
dist-sw01
NX-OS
10.10.20.177
TELNET
cisco / cisco
dist-sw02
NX-OS
10.10.20.178
TELNET
cisco / cisco
inside-host01
Linux
10.10.20.179
SSH
cisco / cisco
inside-host02
Linux
10.10.20.180
VNC
cisco / cisco